- Home
- Products
- Other Products
- LTPH245
Easy Paper Operation Mechanism Low Voltage
Thermal Printer Mechanism
LTPH245
- Max printing speed: 62.5mm/sec
- Easy paper operation
- Platen latch function
- Operationg temperature: -30°C to 70°C
| Model | LTPH245 | |
|---|---|---|
| *1 Use recommended thermal papers *2 Excluding protrusion | ||
| Printing | Method | Thermal line dot printing |
| Number of dots/line | 384 | |
| Resolution(dots/mm) | 8 | |
| Paper width(mm) | 58 |
|
| Printing width(mm) | 48 | |
| Speed(mm/sec)max | 62.5 | |
| Paper path | Curved | |
| Detection | Head temperature | By thermistor |
| Platen position | By mechanical switch | |
| Out of Paper | By photo interrupter | |
| Power supply(V) | Operation voltage(Vdd) | 4.5 to 5.5 |
| Operation voltage(Vp) | 4.2 to 8.5 | |
| Peak current(A) | Head | 2.7 (8.5V / 64 dots) |
| Motor | 0.46 | |
| Service life | Pulse activation(pulse) | 100million |
| Abrasion resistance(km) | 50*1 | |
| Operating temperature (°C) | -30 to 70 | |
| Dimensions(W x D x H mm) | 76.8 X 38.0 X 16.0 *2 | |
| Mass(g) | Approx.46 | |
| Model | IFH002-01B | IFH002-01BK | |
|---|---|---|---|
| CPU | PTH01P02 | ||
| Operating voltage(V) | Vp:4.2 to 8.5, Vcc: 4.5 to 5.5 | ||
| Character matrix(H x W dots) | 16 dots characters : 16 X 8, 16 X 16 24 dots characters : 24 X 12, 24 X 24 |
||
| Character type | Optional font | Yes | Yes |
| Downloaded character | Yes | Yes | |
| User-defined character | Yes | Yes | |
| Extend graphics character set | Yes | Yes | |
| Katakana character set | No | Yes | |
| JIS 1&2 level kanji | No | Yes | |
| Communication interface | Parallel, Serial(C-MOS) | ||
| Dimensions(W x D x H mm) | 70.0 X 70.0 X 11.3 | ||
| Model | ACUH205A | |
|---|---|---|
| *1 Use recommended thermal papers | ||
| Cutting | Method | Circular type |
| Paper width(mm) | 58 |
|
| Paper thickness(μm) | 60 to 80 *1 | |
| Cutting type | Partial cut (Right side single edge point remained) |
|
| Operating time(sec/cycle)max | 0.8 (operating voltage 5.0V. 25°C) | |
| Cut frequency(cut/min)max | 20 | |
| Operating voltage(v) | Motor | 4.2 to 8.5 |
| Detector(control switch) | 4.5 to 5.5 | |
| Starting current(A) | 1.26 (6V on) | |
| Life(cut) | 500,000 | |
| Dimensions(W x D x H mm) | 91.0 X 47.6 X 12.7 | |
| Mass(g) | Approx.46 | |
| Model | PTH01P02 |
|---|---|
| *1 CG ROM: Japanese, Korean | |
| Package form | 80pin QFP |
| Operating voltage(V) | Vp:4.2 to 8.5, Vcc: 4.5 to 5.5 |
| Operating frequency(MHz) | 5+/-0.5% |
| Configuration | C-MOS LSI |
| Communication interface | Parallel, Serial |
| Character type | Extended graphics character set, Other characters is available with CGs*1 or external ROM |
| Character matrix(H x W dots) | 16 dots characters : 16 X 8, 16 X 16 24 dots characters : 24 X 12, 24 X 24 |
| Dimensions(W x D x H mm) | 17.2 X 17.2 X 1.7 |
