 |
|
|
|
 |
- Max printing speed (LTP2242) : 90mm/sec
- Straight and curved path models available
- Label printing
- Support thick paper : up to 135μm*1
(Straight path model only)
      
|
|
| Model |
LTP2242 |
LTP2342 |
LTP2442 |
| Printing |
Method |
Thermal line dot printing |
| Number of dots/line |
432 |
576 |
832 |
| Resolution(dots/mm) |
8 |
| Paper width(mm) |
60 |
80 |
112 |
| Printing width(mm) |
54 |
72 |
104 |
| Speed(mm/sec)max |
90 |
75 |
| Paper path |
Straight / Curved |
| Detection |
Head-up |
By thermistor |
| Platen position |
By mechanical switch |
| Power supply(V) |
Out of paper |
By photo interrupter |
| Operation voltage (Vdd) |
4.75 to 5.25 |
| Operation voltage (Vp) |
21.6 to 26.4 |
| Peak current(A) |
Head |
4.3 (26.4V / 288 dots) |
| Motor |
0.5 |
| Service life |
Pulse activation(pulse) |
100 million |
| Abrasion resistance (km) |
50*1 |
| Operating temperature (°C) |
0 to 50 |
| Dimensions(W x D x H mm) |
85.2 X 61.4 X 27.0 *2 |
106.4 X 61.4 X 27.0 *2 |
138.2 X 61.4 X 27.0 *2 |
| Mass(g) |
Approx.115 |
Approx.135 |
Approx.160 |
*1 Use recommended thermal papers *2 Excluding protrusion
|
Interface
| Model |
IF2303-01B |
IF2303-01BK |
| CPU |
PT230P01 |
| Thermal printer |
LTP2242 , LTP2342 , LTP2442 |
| Operating voltage(V) |
Vp:21.6 to 26.4, Vcc:4.5 to 5.5 |
| Character matrix(HXW dots) |
16 dots characters :16X8,16X16
24 dots characters :24X12,24X24 |
| Character type |
Extended graphics character set |
Yes |
Yes |
| Katakana character set |
No |
Yes |
| Optional font |
Yes |
Yes |
| Downloaded character |
Yes |
Yes |
| User-defined character |
Yes |
Yes |
| JIS 1&2 level Kanji |
No |
Yes |
| Communication interface |
Parallel, Serial(C-MOS) |
| Dimensions(W x D x H mm) |
90.0 X 100.0 X 22.0 |
CPU
| Model |
PT230P01 |
| Thermal printer |
LTP2242 , LTP2342 , LTP2442 |
| Package form |
128pin QFP |
| Operating voltage(V) |
Vp:21.6 to 26.4, Vcc:4.5 to 5.5 |
| Operating frequency(MHz) |
18.43 +/- 0.5% |
| Configuration |
C-MOS LSI |
| Communication interface |
Parallel, Serial |
| Character type |
Extended graphics character set,
Other characters is available with CGs *1 or external RAM |
| Character matrix(H x W dots) |
16dots characters : 16 x 8, 16 x 16
24dots characters : 24 x 12, 24 x 24
|
| Dimensions(W x D x H mm) |
22.0 X 16.0 X 3.1 |
| *1 CG ROM: Japanese, Korean |
Auto cutter
| Model |
ACU2224 |
ACU2324 |
ACU2424 |
| Thermal printer |
LTP2242 |
LTP2342 |
LTP2442 |
| Cutting |
Method |
Slide type |
| Paper width(mm) |
60 |
80 |
112 |
| Paper thickness(μm) |
65 to 125 *1 |
| Cutting type |
Full cut / Partial cut(Leaving center point) |
| Operating time(sec/cycle)max |
0.5 |
| Cutting pitch(mm)min |
10 |
| Cut frequency(cut/min)max |
30 |
Operating
voltage(V) |
Motor |
21.6 to 26.4 |
| Detector(control switch) |
4.75 to 5.25 |
| Starting Current (A) |
1.2 |
| Life (cut) |
300,000 |
| Dimensions(W x D x H mm) |
79.0 X 66.5 X 16.5 |
100.0 X 66.5 X 17.0 |
126.0 X 69.3 X 17.5 |
| Mass(g) |
Approx.120 |
Approx.200 |
Approx.260 |
| *1 Use recommend thermal papers |
|
 |
|
|
|
 |
|
|
|
| Copyright © Seiko Instruments Inc.
, All Rights Reserved. |
|
|
|
|
|
|
|
|
